how to get sand out of phone

How to Get Sand Out of Phone? (Step By Step Guide)

Since it’s summer, most of us are going to be spending most of our time outside, having a good time in the warmth of the sun. Your toes are curled on the sandy bottom as you sit on a chair with your back to the water. There isn’t a more leisurely day. The new smartphone is then found lying on the sand. You panic, wondering, “How to get sand out of phone.”

We are ready to assist you in resolving and overcoming such a catastrophe. Discover what to do along with what you shouldn’t do if your phone gets sand in it, as well as some preventative measures.

What Not to Do When Your Phone Has Sand?

Use only natural air pressure. By blowing wind into the cell phone, you may be able to push the sandy material farther within, making removal more challenging. The internal parts of the phone may also be harmed by the usage of compressed air.

Avoid mouth blowing into the ports. Each breath includes water vapor, which might harm your phone’s delicate components because it isn’t compacted as compressed air does. A receptacle of compressed air is far less to buy than the cost of repairing water damage.

Keep your phone from shaking. While moving the cell phone could help a few grains of sand fall out, it can also result in irreversible harm to the internal parts of the device since the sand might scrape them.

Never use the water. This abrasive combination made of sandy particles and water has the potential to scratch and harm the device’s internal parts. Water can also harm the phone through corrosion as well as additional processes.

How to Safely Remove Sand from Phone Ports?

A portable air compressor becomes the ideal choice if you need to eliminate dirt, sand, or other difficult to see particles. Consider first using a toothpick to carefully dislodge sand before cleaning the power port.

You may use an air compressed canister as a quick and easy solution to clean sand or other dirt off of your mobile device.

How to Safely Remove Sand from Phone Ports

  • Initially, switch off your cell device.
  • To access small spaces, install the nozzle according to the directions on your air-compressed canister.
  • Target the cell phone using a pressurized air canister and give it a couple of rapid sprays.

After using the pressurized air canister to get rid of the sandy substance from the cell phone, utilize a vacuum to extract any remaining tough particles.

The next step is to use a small paper clip to scrape out the last bits of obstinate sand that are still present after using the vacuum plus compressed air canisters.

However, you must be extremely cautious while inserting a piece of paper or security pin because if you press too hard or far, you risk more injury. Always use an even hand and a light touch, and stop pushing right away as you encounter any resistance.

How to Remove Sand from Phone Cases and Covers?

Phone Covers are Made of Silicone Plus Rubber

In order to get started, mix water plus dish soap inside a bowl. After the water has become soapy, put your phone cover in the basin and allow it to rest for a while. After that, you may use a microfiber towel to dry your case so that the water is absorbed without damaging it.

Cover for Wood Phones

Use a light, sensitive brush to gently brush the sand away. Keep your wooden phone case dry before washing it.

The Case for a Leather Phone

It is preferable to use a mild solution while cleaning leather phone covers. The leather case may be gently cleaned using a moist microfiber towel and gentle hand soap.

To properly disperse the soap, apply it to the towel. Employ a plusher terry-style microfiber towel rather than one that is flat weave for drying.

Microfiber is necessary for thorough phone case cleaning, regardless of the type of smartphone case you own. This is so that it won’t scratch, can take up particles, and can absorb enough moisture to dry completely. Microfiber comprises all of these things.

Cleaning Sand off Phone Screens and Other Surfaces

The interior of your cell phone might be harmed by sand, which can readily get into the nooks and fissures.

Try removing the sand off the display of your smartphone with some regular tape if you detect it there. The adhesive side of this tape should be facing out when you wrap it over two fingers. Lightly touch the display using the tape to gather up any little particles that may otherwise harm the sensitive device.

You may use this method to remove sand grains from perilous situations before they can enter the gadget.

Make cautious about switching off the device before clearing it if grit gets inside. Then, blast the sandy substance out from your smartphone’s most delicate areas using a tiny can of air that has been compressed.

In the absence of a can of air compressor, a vacuum cleaner and a tiny crevice tool will work.

In order to prevent the display of your cellphone from being easily scratched by sand, ensure it has a screen protector installed before leaving the house.

Preventive Measures to Avoid Sand in Phones

It should come as expected that keeping your cell phone away from the shore is the most effective method to protect it from sandy particles. Thankfully, there are certain things that can take to prevent your phone from falling into the sand as well as vice versa.

  • Put it away in the shore bag or another container with a lid.
  • Put it in a watertight phone case made of plastic or an inflatable baggie.
  • In the shore bag or, better yet, upon a beach blanket, place your cell phone for safekeeping.
  • Ensure that anybody playing with the dirt does so independently of your electronic gadgets and take extra measures.

There are various phone devices and accessories available, and a lot of them are designed to keep your phone safe at the beach. Start by using a good screen defender and scenario, both of which you presumably already own. Utilize phone port-compatible dust plugs.

What to Do If Sand Damage Occurs?

Your phone may be harmed by sand. It may become stuck in the phone’s cracks and hurt the internal workings.

Sand is composed of microscopic grains that may readily scrape a device’s surface and enter ports and other sections, causing dust to accumulate and, in certain circumstances, water damage.

Take the device to an approved repair facility for inspection and repair if you discover any sand-related damage.

Watch this one,

Video Credits – n Beats

You May Also Like

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *